DC Audio DC5.0K-A3 7300W RMS 18V-Stable Mono Class D Car Amplifier/Amp+Bass Knob

$1,500.00

The 5.0kw competition series amplifier is a 5,000 watt mono block. It is capable of running up to 18 volts for up to 7,300 watts. It is a linkable amp and designed to run a 1 ohm per amp or 2 ohms when strapped. It comes with a bass knob and a clipping indicator. For power inputs it will accept dual 0 awg for power and dual 0 awg for ground. Key Features • 1 ohm stable • Variable low pass filter • Variable subsonic filter • Variable bass boost • Wired remote control • Clipping indicator • Dual 0 awg power and ground inputs (both must be used) We recommend for installation • 1 upgraded battery under the hood • 1 extra 800ci battery in the rear • Minimum of two 0 awg ran from the front battery to the rear battery • Both 0 awg power and ground inputs on amp must have 0 awg ran to them for a total of 4 runs into the amp • Upgraded aftermarket alternator • Dash mounted voltage meter Specifications Features Voltage 5.0kw Output Power (RMS) 4 ohm 14.4V 900W x 1 2 ohm 2,300W x 1 1 ohm 5,000W x 1 1 ohm 16V 6,000W x 1 1 ohm 18V 7,300W x 1 Input Sensitivity 6V~0.2V Low Pass Filter Switchable ( @ 24 dB Slope) Variable Hz 35~250 Subsonic Filter Switchable ( @ 24dB slope ) Variable Hz 10~50 Bass Boost Variable dB 0-9dB Frequency Response Hz 15-270 Signal to Noise Ratio dB 100 Damping factor

SKU: 767675508780 Category: Tags: ,

Brand: DC Audio

Features:

  • Authorized Dealer
  • Brand New In Box
  • Ships Same Day If Ordered By 3PM

Details: The 5.0kw competition series amplifier is a 5,000 watt mono block. It is capable of running up to 18 volts
for up to 7,300 watts. It is a linkable amp and designed to run a 1 ohm per amp or 2 ohms when strapped.
It comes with a bass knob and a clipping indicator. For power inputs it will accept dual 0 awg for power
and dual 0 awg for ground.
Key Features
• 1 ohm stable
• Variable low pass filter
• Variable subsonic filter
• Variable bass boost
• Wired remote control
• Clipping indicator
• Dual 0 awg power and ground inputs (both must be used)
We recommend for installation
• 1 upgraded battery under the hood
• 1 extra 800ci battery in the rear
• Minimum of two 0 awg ran from the front battery to the rear battery
• Both 0 awg power and ground inputs on amp must have 0 awg ran to them for a total of 4 runs into the amp
• Upgraded aftermarket alternator
• Dash mounted voltage meter

Specifications

Features
Voltage
5.0kw

Output Power (RMS)
4 ohm
14.4V
900W x 1

2 ohm

2,300W x 1

1 ohm

5,000W x 1

1 ohm
16V
6,000W x 1

1 ohm
18V
7,300W x 1

Input Sensitivity

6V~0.2V

Low Pass Filter
Switchable

( @ 24 dB Slope)
Variable
Hz
35~250

Subsonic Filter
Switchable

( @ 24dB slope )
Variable
Hz
10~50

Bass Boost
Variable
dB
0-9dB

Frequency Response

Hz
15-270

Signal to Noise Ratio

dB
100

Damping factor

UPC: 767675508780

Scroll to Top