Brand: Kenwood
Features:
- Many new cars equipped with premium amplified systems are nearly impossible to replace and very difficult to upgrade the audio performance. The XR600-6DSP when combined with an iDatalink Maestro AR can use a true stereo signal from the existing OEM stereo and translate all the CAN-Bus communication of the original radio to the XR600-6DSP. Integrates with many Chrysler, Dodge, Fiat, Ford, Jeep, Lexus, Maserati, Ram, Subaru and Toyota premium systems, with more vehicles to follow.
- Use the KENWOOD DSP Control App (compatible with iPhone and Android) to setup the XR600-6DSP. The listening position, advanced equalization and filtering can be set during installation and the setting stored in memory. A simplified mode is available for day to day use.
- The 32-Bit 192kHz DSP gives the flexibility of independent tuning and equalization that is required with the variance of speakers and location challenges being used in a typical system. The channel flexibility allows any function or tuning on all 10 channels making it one of the most versatile solution based amplifiers on the market today.
- These HEX-type terminals can accommodate up to AWG 8 – AWG 12 speaker wire thickness for better signal delivery to speakers. The HEX type design allows for maximum tightening and contact onto the wire.
- These HEX-type terminals can accommodate up to AWG 4 – AWG 6 battery and ground wire thickness for better voltage maintenance from the vehicle’s battery. The HEX type design allows for maximum tightening and contact onto the wire.
Details: It’s an increasingly common problem. You can’t replace your vehicle’s premium factory radio, but the premium factory amplifier isn’t powerful enough for you. Furthermore, the factory amp gets digital information from the vehicle’s databus and replacing the amp would mean you’d lose all audio control, like volume and balance, as well as other features like steering wheel controls, audible navigation alerts, warning chimes, and Bluetooth connection. Replacing the factory amp with Kenwood’s Excelon P-XR600-6DSP amplifier along with its included iDatalink Maestro amp replacement module adds a huge amount of power and tuning ability to your system while retaining all of the vehicle’s audio and communication functions.
Product highlights:
6-channel car amplifier with digital signal processing-75 watts RMS x 6 at 4 ohms-100 watts RMS x 6 at 2 ohms-200 watts RMS x 3 bridged at 4 ohms (4-ohm stable in bridged mode)
CTA-2006 compliant
Class D amp technology
iDatalink Maestro AR amplifier replacement module included
10-channel 32-bit 192 KHz digital processor
All controls and adjustments made via Kenwood DSP Control App via your compatible Bluetooth device
Selectable high- and low-pass filters (31-19,900 Hz) with selectable slopes (6, 12, 18, 24 dB/octave)
13-band graphic and 3-band parametric equalizers
Time delay/alignment
Installer Mode accesses all controls
User Mode limits functions to selecting EQ and time-alignment presets and subwoofer volume
4 processed preamp outputs
Fan cooling
Fuse rating: 40A x 2
Dimensions: 12-5/8″W x 2-1/16″H x 7-1/8″D
UPC: 019048231383
